Materials
PETG carbon fibre
In stockStiffer PETG with a matte finish.
PETG with chopped carbon fibre in it. Much stiffer, a little more brittle, and a matte finish that looks like a finished product. For brackets and frames that must not flex.
At a glance
Price£0.14 per g
StrengthVery high
Max working temperature80 °C
Layer heights0.12, 0.2, 0.28 mm
Colours in stock1
Outdoor useYes
Density1.29 g/cm³
Figures from the filament manufacturer, measured at 100% infill. Printed parts are weaker across the layers.
Photo: a part printed in PETG carbon fibre, close enough to see the layers, white background
When to choose it, and when not to
Good for
- Drone and camera parts
- Brackets that must not flex
- Parts that should look finished out of the printer
Not the right choice for
- Parts that need to bend
- Food or skin contact
How it's printed
Nozzle0.4 mm hardened steel
Nozzle temperature260 °C
Bed75 °C, textured plate
FilamentDried before every job
Colours in stock
Carbon black
Parts printed in PETG carbon fibre
Photo: forty yellow PETG cable clips laid out in rows
Photo: a black PETG camera mount on a tripod
Photo: a grey PETG sensor enclosure, open